All public logs
Combined display of all available logs of Tronche's wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 19:43, 9 May 2020 Tronche (talk | contribs) uploaded a new version of File:Almabraxas-3-power strategy.png
- 00:17, 30 April 2020 Tronche (talk | contribs) uploaded File:Almabraxas-3-power strategy.png
- 12:05, 8 September 2019 Tronche (talk | contribs) restored page Kivy-speedmeter (1 revision)
- 00:41, 8 September 2019 Tronche (talk | contribs) deleted page Kivy-speedmeter (content was: " thumb|right This is the documentation for the my kivy-speedmeter widget. For now, the source co...", and the only contributor was "Tronche" (talk))
- 12:03, 1 June 2019 Tronche (talk | contribs) deleted page Almabraxas/blog/2014/04/13/GPS working (content was: "#REDIRECT Blog:Almabraxas/2014-04-13_GPS_working", and the only contributor was "Tronche" (talk))
- 17:29, 30 May 2019 Tronche (talk | contribs) moved page File:Screenshot from 2019-05-30 18-26-07.png to File:Kivy-speedmeter-demo1-1.png without leaving a redirect
- 17:26, 30 May 2019 Tronche (talk | contribs) uploaded File:Screenshot from 2019-05-30 18-26-07.png
- 23:07, 8 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-05-19 Need for a UVLO (Moved to blog)
- 22:18, 7 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-06-26 T200 thruster run video (Moved to blog 010)
- 23:55, 6 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-06-23 Fixed GPS value encoding for telemetry transmission (Moved to blog)
- 23:13, 5 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-07-06 1st solar powered test (Moved to blog)
- 20:18, 4 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-06-10 First console & frame decoding (Moved to blog)
- 16:15, 3 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-06-08 Message encoding (Moved to blog)
- 15:32, 2 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-07-16 30cm linear servo (actuator) driven by arduino nano + H-bridge (Moved to blog)
- 22:43, 1 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-06-06 First battery-powered test, GPS delay acquisition (Moved to blog)
- 02:03, 1 February 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-08-02 They did it ! (Moved to blog)
- 23:33, 29 January 2019 Tronche (talk | contribs) deleted page :Almabraxas (Useless after moving to blog)
- 22:49, 29 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-31 First successful satellite transmission (Moved to blog)
- 20:57, 27 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-26 SD card logging working (Moved to blog)
- 13:23, 26 January 2019 Tronche (talk | contribs) deleted page :Almabraxas 3 (Useless after moving to blog)
- 13:22, 26 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2016-11-12 back to Afro ESC (for 22V operations) + feedback frequency (Moved to blog)
- 21:21, 25 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-23 More on the pressure sensor, battery level display, satellite modem status LED, decoupling capacitors (Moved to blog)
- 22:18, 24 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-18 BMP 180 pressure and temperature sensor (Moved to blog)
- 10:38, 23 January 2019 Tronche (talk | contribs) moved page :Almabraxas/2018-04-10 Needed ports on the prototype to Almabraxas/2018-04-10 Needed ports on the prototype without leaving a redirect
- 10:37, 23 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-17 Power level sensor (Moved to blog)
- 23:24, 22 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2018-04-01 Building a prototype first (Moved to blog)
- 20:26, 21 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-17 First smooth working of both UARTs simultaneously and external power circuit (Moved to blog)
- 00:27, 21 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2017-05-01 resulting PCB (Moved to blog)
- 17:12, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-08: Teensy 3.1 + ChibiOs + non-blocking Serial (Moved to blog)
- 13:43, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2018-07-28 RFM69 radio module working (driver needs some polishing) + (1) ESC control ok (Moved to blog)
- 13:39, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-05-01 satellite modem - MCU communication problem solved (Moved to blog)
- 02:43, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2015-04-24 Rockblock satellite modem to Teensy MCU UART communication problem (multiple power sources) (Moved to blog)
- 02:22, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2018-08-03 New prototype motor voltage strategy (content was: "As a reminder, the point is that the solar panel gives ~ 22V, while the motors are rated 14.4V. I thought a lot about it, and in my v...", and the only contributor was "Tronche" (talk))
- 01:24, 20 January 2019 Tronche (talk | contribs) deleted page :Almabraxas/2014-04-13 GPS working (content was: "[https://twitter.com/chtronche/status/455413945759965184 twitter] --more-- However, I'm switching to [http://www.adafruit.com/produc...", and the only contributor was "Tronche" (talk))
- 11:57, 22 January 2018 217.126.182.38 (talk) + comment (Mwlib with only one line: "No JSON object could be decoded"#comment-13 - { "version": 1, "range": { "id": "workday", "input": { "init": { "datastreamId": "workerAreaIn", "value": "BuildingSite" }, "end"...)
- 11:57, 22 January 2018 217.126.182.38 (talk) + comment (Mwlib with only one line: "No JSON object could be decoded"#comment-12 - as as)
- 23:50, 26 December 2017 45.72.152.105 (talk) + comment (Exim keep environment#comment-11 - It worked for me perfectly. Thanks.)
- 18:04, 11 August 2017 91.112.102.18 (talk) + comment (Exim keep environment#comment-10 - Didn't work for me. Using Debian 9.1 - switching over to postfix)
- 15:51, 14 May 2017 Tronche (talk | contribs) uploaded File:Almabraxas-2-10-v2 pcb.png
- 20:58, 7 May 2017 84.92.34.227 (talk) + comment (Exim keep environment#comment-9 - On Debian wheezy, this was slightly different as /etc/exim4/exim4.conf.template is generated. The fix (above) was already in: /etc/exim4/conf.d/main/02_exim4-config_options Just the aforementioned template h...)
- 08:38, 20 January 2017 132.195.104.131 (talk) + comment (Exim keep environment#comment-8 - Perfect, thanks for writing it up.)
- 09:25, 18 January 2017 2003:a:36f:cf01:943b:c2cf:19be:7c9b (talk) + comment (Exim keep environment#comment-7 - What if the check went fine (no response) and thus I see the message in the log daily? Thanks for your writing.)
- 19:03, 24 November 2016 109.214.9.151 (talk) + comment (Exim keep environment#comment-6 - I merge the config files, Works perfectly. Thank You !)
- 18:04, 19 May 2016 Tronche (talk | contribs) moved page :Almabraxas/2016-05-19 Need for an UVLO to Blog:Almabraxas/2016-05-19 Need for a UVLO without leaving a redirect
- 12:37, 24 March 2016 Tronche (talk | contribs) deleted page Etc cron.daily exim4-base.LOG. MAIN.Warning. purging the environment.Suggested action use keep environment. (content was: "#REDIRECT Exim keep environment" (and the only contributor was "Tronche"))
- 12:37, 24 March 2016 Tronche (talk | contribs) moved page Etc cron.daily exim4-base.LOG. MAIN.Warning. purging the environment.Suggested action use keep environment. to Exim keep environment
- 12:31, 24 March 2016 Tronche (talk | contribs) moved page Draft:etc cron.daily exim4-base.LOG. MAIN.Warning. purging the environment.Suggested action use keep environment. to Etc cron.daily exim4-base.LOG. MAIN.Warning. purging the environment.Suggested action use keep environment. without leaving a redirect
- 22:06, 18 February 2016 204.12.177.128 (talk) + comment (Incremental mysql backup using mysqldump and svn#comment-5 - As for scripted additions/deletions, you may consider the following: ADD: <code> svn status | grep ^\? | awk '{print $2}' | xargs svn add </code> DELETE: <code> svn st | grep '^!' | awk...)
- 16:43, 31 October 2015 Tronche (talk | contribs) uploaded File:20151031 162929.jpg (Solar panel)
- 16:23, 31 October 2015 Tronche (talk | contribs) deleted page File:20151011 110743.jpg
